I have matte photo paper selected when I'm printing on matte photo and plain when I'm using printer paper.
Re: TS9020 - Printing Lines on Photos
Re: bleeding ink
I understand. But, any suggestions all the same?
Re: 7x10 borderless not printing on TS8220
Re: Driver Download
When I right click on file, my only options are:
Copy link
Show in folder
Report this download as unsafe
No option to re-name.
In addition, when I go to the location on my notebook of my downloads, it is not there.
It is located in C;\Users\kten1\AppData\Local\Temp\win-mg7500-1_0-ucd\MSetup4.exe
Have I not completed the download? I don't see any other options.
Cannot find Quick Menu for PIXMA TR4520
Hi,
The support page says there should be a Quick Menu application for the TR4520 here: https://www.usa.canon.com/internet/portal/us/home/support/details/printers/inkjet-multifunction/tr-series-inkjet/pixma-tr4520/pixma-tr4520?tab=technicalspecifications
But I can't find anywhere the download link. When I've tried one for other printer (v. 2.8.5) it didn't work.
Where can I find working version of Quick Menu for TR4520?
PIXMA MG3610 printing unevenly
When I print on my MG3610 the images are coming out unevenly like the picture. I've checked the cartridges to see if they're installed properly and it seems that they are. It also jams every time I try to do a copy (not print). Any help would be greatly appreciated. Thanks!
Re: PIXMA MG3610 printing unevenly
Hi Co1,
Welcome to The Canon Forum! We really appreciate your participation, however this appears to be a model not suported within the US. The Canon Community is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market.
If you live outside the United States, please CLICK HERE and select your country or region for your support needs.
You're welcome to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Re: PIXMA MG3610 printing unevenly
Re: MG3100 Scan Image Degradation
Hello.
Try using our MP Navigator program to scan with the unit. Visit the following link to download the program:
Re: TS9120
Hello.
Try using our IJ Scan Utility program to scan with the unit. This program should be available in the Canon Utilities listing of the Start Menu. There is also a "Scangear" option in the program that will allow you to do things like preview the image, crop and make color adjustments before finalizing the scan.
If the program is not on your computer, the drivers may not have been installed. Visit the following link to download the latest TS9100 series MP Drivers if necessary.
PIXMA TS9120 Drivers & Downloads
More information about scanning can also be found in the Online Manual at the following link. Bookmark it for future reference.
Re: Scanning 35mm slides
Hello.
The TS8220 is not able to scan film or slides. It has been many years since we've had an all-in-one product that can scan film. The last products that we had that were able to scan film were our "F" series CanoScan models such as the CanoScan 5600F or the CanoScan 9000F Mark II.
Re: Scanning 35mm slides
OK. Thank you!
TS6220 printer cartridge
I have Canon TS6220 printer. Can I use a PGBK280 XLL cartridge rather than a XL?
Re: MG 5720 Not Printing
Re: Where is Canon IJ Network Tool?
In Windows 10, it is not used.
While connected to the USB, run setup again and choose the network option. You will go thru a series of screens that should be self explanatory. A new driver will be downloaded,more screens, etc.
Keep the USB connected until you are told to disconnect.
The final install does not have a screen, just wait and eventually the confirmation will display.
The screen can hang for a bit if you click on details? or whatevr is not the complete button, just wait, it will load.
The setup screens did not display well. The action button, next, back, accept, etc are cut off at the bottom. If you also have this issue you will have to tab 1,2, or 3 times to hit enter and proceed. Trial and error here but you will get thru it eventually.
Enjoy your network printer
Re: Pixma TS6220 Black ink not printing
Same thing happened to my MG6220. Found this solution ... your large blank ink tank is the problem. If deep cleaning, etc. doesn't work, it is probably a circuit board problem. You can still print black, but must use the smaller blank ink tank. You do this by going into your printer settings and changing the media type to Glossy Photo Paper. Click the box at the bottom left that says "Always Print with Current Settings." This tells the printer to use the small black ink tank instead of the large one. Yes, you will not be able to use the large tank but it will allow you to print.
My printer gave the dreaded U052 error "the print head is not correct; install the correct print head." All cleaning, etc. failed and I ended up purchasing a new print head. I thought this was the fix, but noticed that when I printed a black and white document from Word, it printed a blank page. If I printed a color picture, it printed fine. I bought some more large black ink tanks thinking that I had a bad one. However, this did not fix it either. It was another forum user that provided the answer above and it works fine now. Still means I have a problem with the printer and it may be on its way out, but it's a free fix for now.
model of printer
The serial number of my printer is LDAAXXXXX what model would this be?
CD loads, comes out blank on MG7720
Trying to print on a CD from MyImageGarden. Follow the prompts to load the CD tray. Printer pulls it in and I hear the head go back and forth, but nothing on the CD. Paper printing of documents/photos works fine -- no ink problem. MACOS Mojave 10.14.6, printer driver 16.20.0.0. MyImageGarden 3.5.1
Re: MG2922 won't print at all.
When you say reinstall the printer drivers and software, do I delete the printer all together and reinstall? Thank you, Trish
Re: Forgot my admin password Canon G3100
+ I tried several times and still not worked.
+ Installed the latest firmware [3.0.1] [it was having 2.0.X]
+ Then tried again the procdure of waiting for 23 flashes and still not able to configure the printer to connect to the wireless since it ask for an admin password
+ Confirmed the SN by pressing the wireless icon, wait for power led to flash once, and then press the wireless botton again. So it printed the connectivity information and I do see the SN matches with the one on the back.
+ Tried capital letters, lower case but still not working