Windows
Word
It's not saved just printed
I also saved it and same thing
Word
It's not saved just printed
I also saved it and same thing
↧
Re: Printing a photo on 8x11 paper in lower cassette
↧
Re: 7x10 borderless not printing on TS8220
Further update. Photoshop Elements 2019 will also do 7"by10" borderless. It might be a matter of getting the right options checked, which I sometimes miss!
↧
↧
TS9120 hard network config: Printer not responding
I recently installed the TS9120 on my home network and am having problems with printing to it via a Windows 10 computer. The printer wakes up, prints the job, but after printing, a window pops up on the Windows computer saying "Printer not responding". It's like the message that the print was successful did not get back to the computer. Eventually, the computer will send the job again, which will print again, but not clear the job. At one point I had a full paper tray's worth of the same one-page print job.
Somehow the fact that the job was successful is not getting back to the computer. I can cancel the "successful" print job but I have to stand by the printer for the job, let it time out to pop up the dialog, then cancel it. It's a major inconvienence.
Thanks!
↧
Re: Error 5100 on MX922
I had the same problem, where the printer would go through the start-up cycle, it is successful the first time, and if I opened the door to change ink cartridges, the printer cartridge carriage would move to the middle. If I closed the door, it would go through a 2nd successful cycle. If I opened the cartridge door again, it would move the printer carriage to the middle, but when I closed the door again, it would try to cycle, however, the carriage cleaning base would pop up too soon, and the carriage would get jammed against the print head cleaning base. There should be two springs in the opening you see here. Instead, it looks like one of the little black plastic fingers broke, and I found a little spring in the hole. I took the printer apart in an attempt to put the spring back into place to no avail. I suggest getting a new printer. These tiny little plastic fingers most likely will break in 5 years or so. I ended up taking most of the printer apart to attempt to fix. There are many gears involved so hard to tell if I can successfully get the printer back together. Super hard to reattach the spring, and what do I attach it to? I may try gluing on something to attach the spring to, but I have found I needed to dismantle this part of the printer in order to get into the tiny little hole this spring is in. I like the MX 922, other than it is obvious they did not build this to last more than 5 years or so.
↧
Re: TS9020 - Printing Lines on Photos
I ran another nozzle check this morning to look. It seems like there are some barely visible lines on the lightest cyan block, although they're so faint that it's a little hard to tell. The edges of the top BK block are also not quite aligned across - it looks like there's a minimal offset.
↧
↧
TR8520 - 1 page, then wait forever !
New Canon printer, love the print quality, but the response/interface is horrible. Laptop interface is wireless, and desktop is
wired to router, which in turn is wirelessly connected to printer. Laptop, or Desktop, try to print multiple page doc, and printer will print first page, then go off into never land. You have to get up, and hit the STOP button on display, then WAIT forever for it to finish printing. Display shows Process Please Wait Momentarily. Also, at the beginning of a print the WHY does it take minutes for the interface to complete "Collecting Printer Status" ?
Previous generation Canon would print when i asked it to print without any delay, not status collection, no waiting for second page. It just printed !
Both computuers are running Windows 10, and yes OS is latest and greatest.
↧
Re: Canon TS9120 code 5011
Thanks to poor design and quality of Canon printer, I found the cause, maybe it's the lamp of scanner out of work, when printer power on, the scanner need initializing self-check, the scanner head will move and lamp on to return GOOD signal to main board, now the lamp only had very dim green light(normally it should be bright white light), so return NG, initialize failed. I need to find a replacement scanner head and the strip cable to see if the lamp or cable dead, otherwise the mainboard maybe dead.
I am getting an almost new 25$ 9120 body without ink cart. and print head, so I can replace any parts to repair this printer, hope me lucky.
Why Canon's engineer will not tell the user how to check the printer against code 5011.
TSxxxx user need to know: 5011 means the scanner head failure, 5012 means the scanner driver system failure.
Canno support team shall not always push customer to buy service or new printer, please suporting customer to troubleshooting and repair at home, send back to repair is not a good option for user.
Thanks.
↧
Re: Errror message B200 on my PIXMA MX882. What does this mean, had to unplug printer per message.
Hi Woomera,
The B200 error is an indication that your PIXMA MX882 would require service. You are eligible for Canon's Upgrade Program. This is for out of warranty units which have been diagnosed to require service, or for some reason are incompatible with a new or upgraded system. This option allows you a one-time opportunity to purchase a replacement product, discounted from the list price.
To help you get up and running quickly, we also offer free standard shipping (if the order is completed by 12:30PM ET). If you would like to take part in this option, please call our Sales Department at (866) 443-8002 seven days a week, 8am to Midnight. Let them know you have been working with technical support and the Canon Upgrade Program was offered.
↧
Re: Canon TS9120 code 5011
Hi Kainlee,
If you purchased your PIXMA TS9120, please contact Canon for a replacement.
To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
↧
↧
Re: Pixma TR4500 losing wireless ability
Hi eyotter,
Canon's Forum is not intended for immediate help, but a place to allow for the Community to give you assistance and feedback. For a quicker resolution to this issue, please use the link below to reach our friendly Technical Support Team:
http://Canon.us/ContactLI
↧
Re: Code 1850 Pixma TS8220
Hi Bluehen,
Please follow the steps in this Knowledgebase Article to clear the 1850 error:
https://support.usa.canon.com/kb/index?page=content&id=ART171649
If you continue to have difficulties, please contact our support group using the following link:
http://Canon.us/ContactLI
↧
Re: TR8520 Touch screen no longer works
Hi Evolution13,
Please turn connecting your PIXMA TR8520 directly to a wall outlet, and if it already is, please try a different outlet.
If the issue persists, your PIXMA TR8520 would require service. Because your PIXMA TR8520 is less than a year old, it is still in warranty. Please contact us so that we can send a replacement to you.
To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
↧
Re: Skipping lines when printing on M922
Hi JAALESSI52,
It would appear as though your PIXMA MX922 would require service. It is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
↧
↧
bleeding ink
Hi everyone,
I am having trouble with ink bleeding on my art prints. It seems especially bad with blue ink. I've attached a photo of the problem. Can anyone help?
Laura
Printer: PIXMA TS9100
Inks: Star ink, Canon compatible inks
Paper: Aurora White from Red River Paper
↧
Re: TS9120 hard network config: Printer not responding
Hi sanderso67,
There are numerous reasons why this could occur. Because of this, it is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
↧
Re: TS9020 - Printing Lines on Photos
HI dgj93,
This can be caused by the paper settings in the printer driver not matching the settings that the paper manufacturer recommends the drievr be set to.
What paper type do you have selected when printing?
↧
Re: Duplex function no longer works
Hi WSugarman.
What application are you printing from?
What version of OSX is installed on your computer?
↧
↧
Re: TR8520 - 1 page, then wait forever !
Hi Lji1221,
Because there are many causes of the issue you are experiencing, it is recommended that you contact one of Canon's Technical Support Representatives. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
↧
Re: bleeding ink
Hi loryjane,
When not using Canon inks or Canon paper, we would be unable to guarantee the output from your PIXMA TS9120.
↧
Re: Pixma MG2520 false paper jam; Won't feed paper through
What else did you find? My daughter is having the same issue with her MG2522 at school. Paper jam, pulled the paper, no rips, etc., yet it still doesn’t work.
↧