I have a Colorwave 650 receiving Error 450012. The only other information on the screen is telling me to press re-boot, or to power off and power back on using the power button. This error code is not listed in the manual and there is nothing online about this specific code.
Does anyone have any information about this code? The printer was working fine yesterday, no changes have been made to the hardware/software, and I have verified that the paper has been loaded properly.
no help at all. still not working
Hi awoitte!
Thanks for posting!
While our Forum Community members are welcome to chime in, for support on CSA or Oce machines, you'll want to contact Canon Solutions America.
Canon Solutions America Support can be reached at the following link: http://bit.ly/CSASupport
We hope this helps!
I have done all of the above and still will not allow me to access the pringer.
tried and did not work
MP Navigator EX Version 5.1.1
OSX 10.11.4
Canon PIXMA MX892
Downloaded the latest drivers and the error still exist. I had this error before and someone posted removing some duplicate files but cannot remember or find that post. Any suggestions. MP Navigator EX quit unexpectedly when I close down MP Navigator EX.
I need help. My printer worked with USB just fine but after trying to connect wirelessly, it says "Printer is Offline." I did the test for ACTIVE and it IS.
The IP is: 192.168.0.8
Default Gateway is: 192.168.0.1
I have Windows 7 64bit
PLEASE tell me how to get my printer working again like it was. I've reinstalled driver software (no CD on hand) twice and still nothing.
Did you find a solution?
Hello.
Faxes cannot be sent from a Mac computer. It is only possible to send faxes from a computer running Windows.
In your case, you will have to print the item and fax it directly from the printer.
This didn't answer your question or issue? Find more help at Contact Us.
Hello.
Troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Hello.
This issue may occur when there is a loose object stuck inside the printer or if one of the ink tanks was not seated properly. Please try the following:
1. With the cover of the printer open, unplug the power from the back of the printer or the wall.
2. Look for any loose objects or packing material in the printer, clear if necessary.
3. Try gently moving the ink tank holder as close to you as possible. Try pushing the closest ink tank down. Once clicked into place, try moving the ink tank holder closer, repeat as needed.
If you meet resistance, do not attempt to move the ink tank holder any further.
If the error persists, find more help at Contact Us.
Hello.
Our MP Navigator program will have to be installed in order for you to scan. Visit www.usa.canon.com to download the program.
This didn't answer your question or issue? Find more help at Contact Us.
Since downloading Windows 10, I cannot scan or fax on my Canon MX922 printer.
Hello.
Press the machine's Stop button, to cancel printing, change the media type or paper size setting, then print again.
When the media type is set to Photo Paper Plus Glossy II:
Set the paper size to 4"x6" 10x15cm (Windows)/4 x 6 (Mac), or 5"x7" 13x18cm (Windows)/5 x 7 (Mac).
When the media type is set to Glossy Photo Paper:
Set the paper size to 4"x6" 10x15cm (Windows)/4 x 6 (Mac).
When the media type is set to Envelope:
Set the paper size to Envelope Com 10 (Windows)/Envelope #10 (Mac) or Envelope DL (Windows/Mac).
If the error persists, find more help at Contact Us.
I recently upgraded my OS to El Capitan on my iMac. The print function works just fine but when I try to scan I get a message the the printer is turned off or the USB cable is not hooked up. I have double checked the connections and verified that it is attached. I have driver Version 13.7.1.0 installed.
Any ideas?
Thanks,
Jon
What does 'PC not Connected' mean when I try to scan? This is the 1st time I've tried since moving to Windows 10. I downloaded updated drivers but it is still happening.
My printer pixma 452 prints 2 copys every time.
Hi saimaas,
Are you connecting your PIXMA MX410 to your computer with a USB cable or are you using your PIXMA MX410 wirelessly?
Please note, Canon's Forum is not intended for immediate help, but a place to allow for the Community to give you assistance and feedback. If this is an urgent support need, please use the link below to reach our friendly Technical Support Team:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer